First off I wanted to say THANK YOU for making the wise choice in buying your hoop from Canyon Hoops.

There are a few things you should know before you get started using your hoop. Please take a moment to read through the info on this page in order to ensure you get the most out of your shopping experience with Canyon Hoops.

 

You bought one of 2 styles of hoops we sell and each is packaged a bit differently, I’ll cover how to unpack each hoop in the sections below.

 

Hoop is Coiled Into Itself

 

Step 1) Remove all plastic wrap and tape holding hoop together.

Step 2) Put the hoop on the floor and VERY GENTLY push down on the hoop at the connection point to release some pressure.

Step 3) Pull hoop apart. Careful, your hoop is under tension and an end may go flying out at you!

Step 4) Once your hoop has had a chance to naturally unwind itself, go ahead and insert the small end into the big and until you hear the snap button go “click”.

Step 5) Go Hoop!

 

 

Hoop is NOT Coiled Into Itself

The steps are pretty much identical to the ones above, expect that your hoop is not connected into itself and there is a bit more packing wrap to undo.

 

Step 1) Remove all plastic wrap and tape holding hoop together.

Step 2) Allow the hoop to sit for a minimum of 12 hours, more might be better.

Step 3) Once your hoop has had a chance to naturally unwind itself, go ahead and insert the small end into the big and until you hear the snap button go “click”.

Step 4) Go Hoop!

 

 

Let us know if you have any questions by emailing support@canyonhoops.com